Receiver Tansun 6,5kW
For orders of thermostats and accessories separately (without heating panels) there is a courier service. Thank you for your understanding!
The Tansun wireless wall fixing 6.5kW receiver with a dimmer function will control a resistive load of up to a maximum of 6500W. The Tansun infrared heaters can be dimmed down between four stages: 100%, 75%, 50%, OFF. This high quality receiver is suited to providing flexibility when controlling higher wattage heaters in many commercial environments.
The receiver could be used independently, but for easier use we recommend Remote control for Tansun heaters. One Tansun remote is able to control 1-1000 infrared heaters in unison.
- Suitable for infrared and resistive heaters
- Controlled by transmitters or wired pushbuttons with function ON/OFF and Dimming 0%-100%
- Controlled by wired or wireless movement sensors
- Automatic room temperature control- "Soft start": extending the lifetime of the Infrared Heaters
The mesmorised transmitter displays the programmed values:
a) Push-button Ch1: 100%
b) Push-button Ch2: 75%
c) Push-button Ch3: 50%
d) Push-button Ch4: OFF
Technical specification:
- Load at 230 Vac ~ 50/60Hz: one 6500W heater or two 3200W heaters
- Load at 230 Vac ~ 50/60Hz: one 3400W heater or two 1700W heaters
- Dimensions (mm): 195 x 200 x 75
1- Press the push button P1 two times and hold it down, the buzzer will make one beep and then sound continuously.
2- During the beep sound press a push button of the transmitter which has to be mesmorised; the memorization is indicated by the intermittent sound of the buzzer. All the push-buttons of the transmitter are automatically memorized with a preset configuration as in the above diagram.
